An energy recovery ventilator, or ERV, brings outdoor air in and exhausts indoor air while transferring some heat and moisture between those air streams. It can make controlled ventilation more practical when a tiny home's windows stay closed. It is not automatically necessary in every tiny house, and it does not replace heating, cooling or a dehumidifier.
For a container house on wheels, decide how the occupied room will be ventilated before choosing the equipment. The chassis does not specify the ventilation package, and an ERV should not be assumed to be included.
ERV or HRV: what changes?
Both systems recover heat from ventilation air. An HRV primarily transfers heat; an ERV also transfers moisture. That difference matters when the air outdoors is much more humid—or much drier—than the air you want indoors.
| Equipment | Main job | What it does not establish |
|---|---|---|
| HRV | Exchange air and recover heat | Moisture recovery or suitability for every cold-climate room |
| ERV | Exchange air and recover heat and moisture | Active humidity removal or a guaranteed indoor humidity |
| Dehumidifier | Remove moisture from room air | A supply of outdoor air |
| Room air conditioner | Heat or cool as its specification allows | A dedicated outdoor-air system unless that provision is specified |
In a cold, already-dry home, moisture recovery can help limit further drying. In a hot-humid climate, it can reduce the moisture added by ventilation compared with an arrangement without moisture recovery. But the chosen system still needs to suit the actual indoor moisture load. Health Canada's ventilation guidance explains these distinctions; it does not make “ERV south, HRV north” a universal selection rule.
Start with the problem you need to solve
If the room feels stale with closed windows, review its outdoor-air provision. If the problem is water droplets, staining or dampness, first investigate the moisture source and cold surfaces. The condensation diagnosis guide helps distinguish those questions. Buying an ERV without resolving a leak will not repair the leak.
Keep heating and cooling separate from recovery ventilation. An ordinary ERV transfers energy between air streams; it is not a substitute for the home's required heating or cooling capacity. The ducted and ductless air-conditioning comparison addresses that equipment choice. The insulation guide addresses heat transfer through the enclosure.
Choose equipment that fits the room and stays serviceable

A compact ducted unit needs space for the equipment, ducts and access to its filters and core. A through-wall system avoids some duct routes, but requires compatible wall depth, exterior terminals and an arrangement appropriate to the selected equipment. Some alternating-flow products operate as coordinated pairs; do not assume one visible wall unit serves every room.
Ask for the required airflow at the actual operating condition, noise information for the intended sleeping or working space, filter access and cold-weather operation. Frost protection and any condensate provision must follow the particular model's instructions. “Small house” does not determine all those answers.
Coordinate any panel opening before manufacture. Use the service-opening planning guide to frame that discussion; do not drill a modular panel because another home's installation video shows a convenient location.
The US Department of Energy's balanced HRV/ERV checklist calls for climate-appropriate selection, measured ventilation airflow and maintenance instructions. Its program-specific airflow figures are not a universal sizing rule for a wheeled cabin.
FAQ
Will an ERV cure condensation?
Not by itself. It changes ventilation and moisture transfer, but the moisture source, enclosure temperatures and actual airflow still matter. Persistent dampness needs investigation rather than a product-name solution.
Does every tiny house need the same pair of wall units?
No. Room divisions, occupancy, airflow requirements and the chosen system matter. Ask how the proposed arrangement serves closed bedrooms and wet rooms.
What should I allow for after installation?
Access to filters, the heat-exchange core and exterior terminals, plus the maintenance and checks specified for the equipment. A unit hidden behind fixed cabinetry is difficult to maintain even if it fitted on the original drawing.
Put recovery ventilation into the building brief
Tell PQSE the destination, floor plan, occupancy and whether the home will normally operate with closed windows. Describe the heating and cooling arrangement and any humidity concern. Ask which ventilation equipment and openings can be coordinated with the selected building, and who provides local design, installation and commissioning.